Wax Bullet Molds™
Molds for making your own wax bullets.

Melting wax and casting wax bullets is super easy and fun to do. As an avid shooter, making our own wax bullets and getting out and having fun is a daily goal.

This mold shown to the left is made from a special silicone which has a Shore A Hardness of 16A. These molds are highly tear resistant and have a very low long term rate of shrinkage.

These molds can resist up to 450F Fahrenheit (232.222 Celsius) so they are perfect for casting any kind of wax for making wax bullets.

One issue we have found with people making their own wax bullets is they add to much bee's wax or other substances to their wax blends and it causes the bullets to shrink a tiny bit and not fit the casings as well as they should.

The mold shown above is six inches square by about an inch thick. This particular one is our 45 caliber and is a 49 cavity mold.

If you have any questions at all about our wax bullet molds please don't hesitate to write us and ask.

Wax Bullet Molds™ Molds for making your own wax bullets.

Wax Bullet Molds™
Molds for making your own wax bullets.